- Moteurs immergés
GF6" SUBMERSIBLE MOTORS
TESLA GF 6” Asynchronous two-pole submersible motor, made in AISI 304 stainless steel and cast iron with paint coating for parts in contact with water. The cooling and lubrication of the thrust bearing assembly and carbon bushes is provided by a mixture of water and glycol. Squirrel cage rotor mounted on Kingsbury self-centering thrust bearing. Stator housed in an airtight stainless steel casing (canned-type). Removable cable connector to allow fast and easy maintenance. The cable is certified to ACS, WRAS and KTW standards. Motor suitable for use with variable frequency drive (30 Hz-50/60 Hz). The motor is available in three-phase version with DOL or STAR-DELTA starting type. Overload protection must be provided by user. Available on request the 6GX version is made entirely in stainless steel AISI 316 with mechanical seal in silicon carbide. The motor can be equipped also with a PT100 temperature sensor.
TECHNICAL SPECIFICATION
Flange: NEMA 6"
Insulation class: F
Degree of protection: IP68
Min Cooling flow: 1.0 ft/sec @ 95 °F
Voltage tolerance: + 6% / -10%
Max starts: 25/h
Max operating depth: 984 ft
Horizontal operation: 5.5 HP - 50 HP
Range
Single Phase 230v 60Hz: From 5.5Hp to 15Hp
Three Phase 230v 60Hz: From 5.5Hp to 30Hp
Three Phase 460v 60Hz: from 5.5Hp to 60Hp
Other Voltage and frequencies available on request.
TESLA GF 6” Asynchronous two-pole submersible motor, made in AISI 304 stainless steel and cast iron with paint coating for parts in contact with water. The cooling and lubrication of the thrust bearing assembly and carbon bushes is provided by a mixture of water and glycol. Squirrel cage rotor mounted on Kingsbury self-centering thrust bearing. Stator housed in an airtight stainless steel casing (canned-type). Removable cable connector to allow fast and easy maintenance. The cable is certified to ACS, WRAS and KTW standards. Motor suitable for use with variable frequency drive (30 Hz-50/60 Hz). The motor is available in three-phase version with DOL or STAR-DELTA starting type. Overload protection must be provided by user. Available on request the 6GX version is made entirely in stainless steel AISI 316 with mechanical seal in silicon carbide. The motor can be equipped also with a PT100 temperature sensor.
TECHNICAL SPECIFICATION
Flange: NEMA 6"
Insulation class: F
Degree of protection: IP68
Min Cooling flow: 1.0 ft/sec @ 95 °F
Voltage tolerance: + 6% / -10%
Max starts: 25/h
Max operating depth: 984 ft
Horizontal operation: 5.5 HP - 50 HP
Range
Single Phase 230v 60Hz: From 5.5Hp to 15Hp
Three Phase 230v 60Hz: From 5.5Hp to 30Hp
Three Phase 460v 60Hz: from 5.5Hp to 60Hp
Other Voltage and frequencies available on request.
