S4 60Hz

4” multi-impeller borehole pumps for clean water, designed for water boosting, gardening and irrigation, lifting water from
boreholes in residential building service, commercial building service and irrigation systems also for agriculture. The S4 pumps must be
installed in wells with a diameter of at least 4”, or in tanks or cisterns and it increases the pressure of water that can then be used for
example to water medium or large gardens or (in the case of models with a greater flow and head) in irrigation systems in agriculture.

TECHNICAL DATA
Flow rate: up to 120 GPM
Head up to: 1500 feet
Maximum immersion depth: 4GG - 4TW: 984 feet
Type of pumped liquid: Clean, free of solids and abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
Maximum permitted amount of sand:  0.009 lb/ft3   (150 gr/m3 )
Liquid temperature: From +32°F to +104°F
Output connection:
S4 5-25: 1” 1/4 NPT
S4 35-90: 2” NPT
Pump maximum diameter: 3.9 inches
Impeller/s material: Technopolymer
Maximum number of starts: 20/hour
Protection class: IP68
Motor insulation class: F
Single phase power input: 1x115 V 60Hz / 1x230 V 60 Hz
Three phase power input: 3x230 V 60 Hz / 3x460 V 60 Hz
Possible type of installation: Fixed in vertical position. Horizontal installation is possible, it is recommended to install a cooling sleeve
Special versions on request: Different voltages, different cable lengths, version with 4GX
Certification: Pump end NSF61 certificate is pending approval.
4GG - 4TW motor: CSA approved to UL and CSA Standards

Available as standard:
- Only pump end
- Pump body with water-filled motor 2WIRE
- Pump body with water-filled motor 3WIRE

CONSTRUCTION FEATURES OF THE PUMP
Technopolymer impellers housed with stainless steel adjustment rings. Pump liner, shaft, coupling with motor, integrated suction filter and cable guard
are in stainless steel. Suction and delivery supports in micro-cast AISI 304 stainless steel. Removable built-in non-return valve in technopolymer or with
stainless steel plate (depending on model, see the material table). Technopolymer impellers designed to ensure high levels of efficiency in accordance
with PEI Directive starting from 25 GPM. NSF61 certificate is pending approval.

CONSTRUCTION FEATURES OF THE MOTOR
Pump can be coupled with 4” motors : 4GG, 4TW and 4GX.

4GG motors line includes single phase and three phase motors from 0.5 HP to 10 HP. 4TW is a single phase, 2 wire line from 0.5 HP to 1.5 HP. They are
built based on resin canned stator technology. 4GG and 4GX single phase motors have to be installed with a control box, 4CBUS line sold separately, in
the three-phase version the protection must be guaranteed by the user.
4TW motors are operated without starting control box, based on 2 wire technology with internal capacitor and thermal protector.
All parts in contact with water of 4GG and 4TW made in SS304, 4GX in full SS316.
All motors come with CSA approval, NSF61 is pending in process.
Suitable for use with Variable Speed Drive ( 30-60 Hz ).