SMARTPRESS

SMART PRESS is an ON/OFF electronic system designed to regulate the pump work, without using an expansion vessel.

The device stops the pump to protect against dry running without using level probes or float switch.

It has an adjustable cut-in pressure and even with a high flow the pressure losses are small.

The WG (WATER GUARDIAN) version of the SMART PRESS will try to restart the pump every 30 miutes after the dry run protection has stopped the pump.

All the SMART PRESS models have a MANUAL RESTART.

The standard version is not supplied with cables.

OPERATION

1) Controls pump operation, automatically and without interruption, with constant pressure and delivery during supply from one or more distribution points. The pump starts when the pressure of the system is less than the start pressure.

It stops when Smart Press no longer detects an appreciable outlet flow (see point 2).

2) Keeps the pump operating for a brief period (approximately 5 seconds) after supply has stopped at the tap closing.

3) If there is no water at the suction point, it blocks the pump,without using level probes or float switches.Or it releases automatically when a pressure above the one required to start the motor-driven pump is injected in the delivery line.

One version of system is identified as Smart Press WG (where WG is for Water Guardian). In case of block due to lack of water, this system effects some tries of automatic random, as equal as pressing the pushbutton of manual reset, every 30 Min.

4) It is supplied with a flow sensor, manufactured with a geometry which reduces the loading losses even with very high flows.

5) Lights indicate the various operation phases:

• green LED on: present power supply
• yellow LED on: pump working
• red LED on: blocked due to lack of water at supply point.

FEATURES & BENEFITS

• Plug and Play
• No Pressure Tank Required
• Compact Design
• Weather Proof (Always recommended to protect from the elements)
• 2 Pressure versions available (25psi & 40psi)
• Dry Run Protection
• Automatic Operation
• Available in 1 Phase 115v & 230v 60Hz
• Adjustable Start Pressure
• WG Version with auto-restart